The fun of your trip can be ruined when issues like flat tire surfaces. a flat tire can be frustrating when you are trying to meet up with an appointment, wearing your best outfit, or when you are in bad weather trying to get to your destination.

Find a secured place to  Change the tire immediately you notice a flat tire to avoid further damage that might occur as you try to drive to the nearest bus stop. 

 

It is advisable to always go along with a jack for an unprepared occurrence like a flat tire. An RV jack will go a long way to aid.

 

Can you use an RV jack to change a tire?

 

Yes, while you are traveling and the most typical unprepared event arises, such as a flat tire. All you have to do is stop from a safe distance and change the flat tire with the spare. You’ll succeed if you use your RV jack.

 

What size jack do I need for a travel trailer?

The size of the jack you require depends on what you plan to use it for. If you want to raise a travel trailer wheel or another minor component, you will need a 10-ton jack, which weighs 20,000 pounds. Then you will need more tons if it is to sustain the complete travel trailer.

Keep in mind that there are many jack types and sizes for travel trailers. Following are some listings of them:

 

10-ton hydraulic – This 10-ton hydraulic jack is straightforward to use. It’s fantastic when someone doesn’t want to spend time setting up their stabilizer and jack for it. Every RV owner needs to have access to at least a 10-ton hydraulic jack.

 

Scissors jack- these render great support and stabilize your trailer. They are manually operated and can be stored in your RV without occupying much space. They have the ability to contrast and extend to your desired need.

 

3-ton floor jack: these are smaller floor jacks which manually operated and can carry lighter weight like tires. 

 

 Stacks jack: these jacks are smaller than other jacks but carry weights more than the 3-ton jacks. They can be used to support the middle of your travel trailers.

 

Can you lift a travel trailer with stabilizer jacks? 

Since stabilizers are not intended to raise travel trailers, doing so will cause harm to the stabilizer. On each of their back corners, most travel trailers are constructed with stabilizers. The stabilizer prevents the camper from bouncing as it is moving.

 

Stabilizer jacks are of different types these are:

 

 Scissors jacks

 manufacturers built and install this jack on the travel trailers as they are cheap. They are simple and do a great job for RV owners.

 

 The scissors jack mode of operation is manual. They require the owner to raise and lower them during use. You use a drill or ratchet to loosen and tighten the bolts that are inside. Placing much weight and over-tightening them can damage them.

 

Drop down stabilizer jacks 

 The drop-down stabilizer jack is another type of jack that can be manual or automatic. They can be used as a part of auto-leveling in RV.

 

Screw jacks

 are constructed with aluminum materials that make them weigh lighter. They are a cost-effective method that stabilizes your RV and can hold up to 6,000 lbs. 

  Screw jacks can easily be adjusted and moved around your camper when needed.

 

Full-width double stabilizers 

 this type of jack enables you to simplify the setting up and stabilizing of an RV. Typically, these stabilizers support and level RV rigs and can easily be adjusted to accommodate uneven campers’ surfaces.

 

Full-width double stabilizers are strong enough to hold about 6000lbs.

How do you lift a trailer without a jack?

 It is almost impossible to lift a trailer without a jack, as jacks make it easier and simple to lift the trailer. Lifting trailers with hands can’t be a possible option for any trailer owner. A trailer owner must at least have one or two types of jack for the job of lifting to be done.

How To Change a Tire On a Tandem Axel Trailer Without a Jack

To change a tire on a tandem axle trailer without a  jack might look impossible. But it can be achieved with the help of trailer aid and tire aid plus. Of course, no people wish to wish to have a flat tire while on a trip, but it happens even when you are not prepared for it.

 

Trailer aid and trailer aid plus enable you to change your flat tire anywhere, anytime without the help of a jack.

 

Trailer aid is made from a lightweight strong super polymer and it is waterproof and rustproof. It can hold weight up to 15,000 lbs. You can travel with trailer aid anywhere for easy change of your trailer tire even when you are alone on a highway. With its front holes and rear holes, it allows easy access and handling. Trailer aid has clean edges and will not hurt your hand it can easily be lifted because it has lightweight.

 

Trailer aid plus has similar benefits to trailer aid but has a slight difference. It performs maintenance on brakes, axles, and wheels.

 

How to change a tire on a single tandem trailer without a jack

 

When you have a flat tire, it can be discouraging, especially if you’re rushing to get to your appointment and consider how it will affect your clothes. You must take the necessary steps to start your car. When it is a trailer, the situation might be even more horrific.

 

That not withing there are some things you will need to change your flat tire without a jack. These are; a spare tire, lug wrench, portable air compressor, socket, tire pressure gauge, one Ramp, Chocks, shovels, lubrication, and wrench.

 

 The following are steps to change a flat tire:

• Leave the traffic and pull over at a safe place
• Bring out all the list tools above 
• Loosen the lug nut with the lug wrench to change
• Ontop the ramp, drive the good tire that’s on the other side as the flat tire
• If the wheel that needs to be changed cannot spin freely, add blocks to the ramp to increase the height of the ramp or dig beneath the flat tire.
• Set the tow vehicle’s parking brake, and chock the other tires you are not working with.
• Remove the lug nuts on the flat tire with the lug wrench
• Pull out the flat tire from the hub
• Replace the hub with the spare tire
• Lubricate the studs with light machine oil before placing the lug nuts back
• In a star pattern, tighten the lug nuts 
• Replace the flat tire where the spare tire was
• Drive of the ramp
• Torque the lug nuts until
• Lastly, check the air pressure in the other tire to ensure they are well gauged.

conclusion

As you move around, the RV jacks will keep your RV steady about the rig. Remember there are different types such as electric jack, permanent jack, scissors jack, hydraulic jack, tripod jack, drop leg or drop-down jack, and full-width double jack. They come with different designs, weight capacity,  mechanical/electrical mode of operation, made with different materials, and different ways to set them.